EVAPRE-RTU is a ready-to-use evaporation retardant that is economical, high quality, and water-based. It is specifically designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surface prior to curing. EVAPRE-RTU provides a significant aid in producing high quality concrete flatwork. Rapid evaporation of water is retarded, slab surface conditions are normalized, and workers can adhere more closely to established finishing schedules when using EVAPRE-RTU. EVAPRE-RTU is also VOC-compliant.

EVAPRE-RTU significantly reduces plastic shrinkage, cracking, wind crusting, stickiness, and sponginess, which often cause poor and uneven surface texture. These conditions result when the hydration is more rapid than the movement of bleed water to the surface. EVAPRE-RTU effectively combats and minimizes the effects of rapid drying conditions such as low humidity, low dew point, high winds, direct sunlight, hot weather, heated concrete, or placement of concrete in a heated enclosure or interior area during cold weather. The protective film shield disappears as soon as the concrete is no longer plastic.

USES
EVAPRE-RTU is ideal for use as an evaporation retardant for concrete surfaces where the evaporation rate exceeds the rate of bleeding. EVAPRE-RTU can be used with condensed silica fume concrete, concrete containing fly ash, and all cementitous products. When applying surface hardeners, EVAPRE-RTU can be used after screeding and after the first floating operation, if necessary.

NOTE:
EVAPRE-RTU is specifically designed to fight off the destructive effects of early rapid evaporative moisture loss. Early rapid evaporative moisture loss is addressed in ACI Committee 305R-91: Recommended Practice for Hot Weather Concreting. This report contains a chart on page five that depicts the effect of concrete and air temperatures, relative humidity, and wind velocity on the rate of evaporation of surface moisture from concrete. It provides a graphic method for estimating the loss of surface moisture for various weather conditions.

FEATURES/BENEFITS
• Significantly reduces plastic shrinkage and cracking caused by evaporation in low humidity, high temperatures and high winds.
• Allows use of lower slump and lower water: cement ratio concrete.
• Provides smooth and durable concrete flatwork.
• Reduces wind crusting, stickiness, and sponginess, which often cause poor and uneven surface texture.
• Allows finishing crews to adhere to established schedules.
• Reduces overall cost because timing of finishing operations is less critical.
• VOC compliant…actual VOC content is 0 g/L.
• Helps minimize surface cracking due to early water loss of silica fume concrete.