Lincoln Contractor Supply, Inc.
Wisconsin Inquiries
1 (800) 242-1255
Out-of-State Inquiries
1 (800) 236-1327
Site Navigation

Wacker Neuson 3" 110V Submersible Pump 2 HP

Wacker Neuson 3" 110V Submersible Pump 2 HP

Part #WA-0009118 Availability0

$1,665.00 / EA

Wacker Neuson WA-0009118 110V Submersible 3” Pump 2 HP

Wacker Neuson 3" Submersible Pump #WA-0009118: Superb design for peak performance

The Wacker Neuson three-inch Submersible Pump from Lincoln Contractors Supply is a lightweight (only 63.5 pounds), single phase/60 Hz pump. It’s a convenient, portable unit -- designed and engineered to deliver peak dewatering performance in even the toughest workplace. This pump is right at home in mines, construction sites, municipalities or farms. If you needed dewatering, this Wacker Neuson three-inch submersible pump can handle it – even if it’s the dirtiest water. If you want any liquid gone, it will be!

Wacker Neuson 3" Submersible Pump #WA-0009118: engineered with power and protection

This 2-horsepower 220-volt pump has a special v-ring lip seal to prevent wear from water which contains suspended debris. The heavy duty strain relief power cord makes this pump a powerful unit which is also convenient and easy to move around. The Wacker Neuson three-inch Submersible Pump from Lincoln Contractors Supply can handle liquids containing solids up to .4 inches. You’ll be assured of fast dewatering. The motor has built-in thermal protection and excellent protection against blockage of the semi-vortex impeller. Discharge diameter is three inches. When you’ve got this Wacker Neuson submersible pump, water will never again get the best of you!

Features

• Preliminary v-ring (lip seal) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
• Lightweight, compact design with heavy-duty, strain relief power cord offers a highly durable pump that is still easy to transport and install.
• These high performance single-phase submersible pumps are capable of handling solids up to .4 inches, ideal for job sites needing fast dependable dewatering.
• Oil lifter provides lubrication to seal faces during operation minimizing the risk of seal failure due to overheating.
• Silicon carbide-faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrications, cooling and overall motor protection.
• Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.

Specifications

• Operating weight = 63.5
• Shipping weight (including packaging) = 78
• Length x width x height = 9.5 x 9.5 x 22.5
• Solid size capacity = 0.3
• Max. power output according to DIN-ISO 3046* = 2
• Shipping size (LxWxH) = 13.5 x 13 x 28
• Max. head = 69
• Max. discharge = 111
• Max. pressure = 30
• Motor type = Single phase/60 Hz
• Voltage = 220
• Speed = 3,440
• Cable length = 32
• Cable size = 12
• Impeller material =
• Impeller type = Semi-vortex
• Discharge diameter = 3
• Current (full load/start @ 220V) = 11.5/68.0

Contact the submersible pump specialists at Lincoln Contractors Supply today for the exact 3” pump you need for your specific application.

Wacker Neuson 3" 110V Submersible Pump 2 HP

Wacker Neuson 3" 110V Submersible Pump 2 HP

Part #WA-0009118 Availability0

$1,665.00 / EA

Wacker Neuson WA-0009118 110V Submersible 3” Pump 2 HP

Wacker Neuson 3" Submersible Pump #WA-0009118: Superb design for peak performance

The Wacker Neuson three-inch Submersible Pump from Lincoln Contractors Supply is a lightweight (only 63.5 pounds), single phase/60 Hz pump. It’s a convenient, portable unit -- designed and engineered to deliver peak dewatering performance in even the toughest workplace. This pump is right at home in mines, construction sites, municipalities or farms. If you needed dewatering, this Wacker Neuson three-inch submersible pump can handle it – even if it’s the dirtiest water. If you want any liquid gone, it will be!

Wacker Neuson 3" Submersible Pump #WA-0009118: engineered with power and protection

This 2-horsepower 220-volt pump has a special v-ring lip seal to prevent wear from water which contains suspended debris. The heavy duty strain relief power cord makes this pump a powerful unit which is also convenient and easy to move around. The Wacker Neuson three-inch Submersible Pump from Lincoln Contractors Supply can handle liquids containing solids up to .4 inches. You’ll be assured of fast dewatering. The motor has built-in thermal protection and excellent protection against blockage of the semi-vortex impeller. Discharge diameter is three inches. When you’ve got this Wacker Neuson submersible pump, water will never again get the best of you!

Features

• Preliminary v-ring (lip seal) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
• Lightweight, compact design with heavy-duty, strain relief power cord offers a highly durable pump that is still easy to transport and install.
• These high performance single-phase submersible pumps are capable of handling solids up to .4 inches, ideal for job sites needing fast dependable dewatering.
• Oil lifter provides lubrication to seal faces during operation minimizing the risk of seal failure due to overheating.
• Silicon carbide-faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrications, cooling and overall motor protection.
• Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.

Specifications

• Operating weight = 63.5
• Shipping weight (including packaging) = 78
• Length x width x height = 9.5 x 9.5 x 22.5
• Solid size capacity = 0.3
• Max. power output according to DIN-ISO 3046* = 2
• Shipping size (LxWxH) = 13.5 x 13 x 28
• Max. head = 69
• Max. discharge = 111
• Max. pressure = 30
• Motor type = Single phase/60 Hz
• Voltage = 220
• Speed = 3,440
• Cable length = 32
• Cable size = 12
• Impeller material =
• Impeller type = Semi-vortex
• Discharge diameter = 3
• Current (full load/start @ 220V) = 11.5/68.0

Contact the submersible pump specialists at Lincoln Contractors Supply today for the exact 3” pump you need for your specific application.