The Sullair 375H AF iT4 delivers 375 cfm at 150 psig or 10.6 m3/min at 10 bar of aftercooled and filtered compressed air that meets or exceeds ISO 8573-1: Class 1.7.1 quality standards.

The AF System consists of a specially designed Sullair portable compressor with a built-in high-capacity, low-approach aftercooler, a water-condensate trap and a highly efficient contaminant removal system.

The contaminant removal system includes primary and secondary filters with condensate traps. The primary filter is a coalescing type filter which captures and removes particles down to 1.0 micron and larger in diameter, and maximum remaining aerosol content at 0.5 PPM. The secondary filter is a high efficiency coalescing type which removes particulate to 0.01 micron and larger in diameter, and maximum aerosol content of 0.01 PPM.

Features
• Rotary screw compressor
• Instrument quality air as per ISO 8573.1:Class 1.7.1
• Low-approach aftercooler and moisture separator
• Two-stage dry-type filters
• Full fluid containment retention frame
• Cold box design
• Adjustable height hitch
• E-Z lube axle
• Curbside instrument panel
• Gauges and LCD graphic display on the controller
• Idle warm-up valve
• Rocker type start switch
• Emergency stop
• Fuel/water separator
• 0 to 100% capacity control
• Automatic inlet valve
• Integral glow plug starting aids
• Durable powder coat finish
• AWF™ compressor fluid