The Wacker Neuson DPU4545HE 18 Reversible Vibratory Plates diesel powered engine drives its enhanced two shaft exciter technology. With convenient reversible locomotion, this machine ensures maximized satisfaction for compacting most soil types and asphalt. It has a maximum speed of 82 feet per minute, powering through any construction job at a rapid pace. The control handle makes this plate compactor simple and safe to operate. With one easy shift of the handle, the operator can switch directions or halt the machine for on-the-spot soil and asphalt compaction.
We offer you a great choice of reversible vibratory plates to help you get the job done effectively.
Shop Lincoln Contractor Supply, Inc.s full line of Wacker Neuson compacting equipment online today!
High compaction force combined with fast forward and reverse travel means the DPU 4545 achieves great productivity. It is an all around versatile plate for all job sites that place high demands on the machine's performance potential. Its other outstanding characteristics are high operator comfort and a long service life. It is perfectly suited for the compaction of building back-fill, and of frost and sub bases when constructing roads, paths and parking lots. The 69 Hz frequency makes the DPU 4545 suitable for all purposes and compacts even medium-weight interlocking paving stone reliably.
Features
Intuitive guide handle design: The operator changes the direction of travel and speed simply by moving the handle forwards and backwards.
Infinitely variable forward and reverse operation including spot compaction for easy maneuverability. Ideal for trenches and large areas.
Comprehensive comfort features: e.g. low oil shut off, self tightening V-belt and maintenance-free alternator.
The large diesel engine with its high reserve capacity ensures great efficiency and a long service life.
Available with standard electric start and crank start back-up. Different extension plates provide a variety of operating widths.
Specifications
Operating weight = 892.9 lb
Centrifugal force = 10,116 lbf
Base plate size (W x L) = 17.7 x 35.4 in
Base plate thickness = 0.47 in
Height (without guide handle) = 30.3 in
Operating width (without extension plate) = 18.1 in
Operating width (with extension plate) = 23.6 in
Frequency = 69 Hz
Advance travel max. (depending on soil & environmental factors) = 82 ft/min
Surface capacity max. (depending on soil & environmental factors) = 9,687 ft²/h
Engine / Motor type = Air-cooled single-cylinder, four-cycle diesel engine
Engine / Motor manufacturer = Hatz
Engine / Motor = 1D42S
Displacement = 27.1 in³
at rpm = 3,600 rpm
Operating performance max. (DIN ISO 3046) = 9.4 hp
Operating performance (DIN ISO 3046) = 6.5 hp
at rpm = 3,000 rpm
Fuel consumption = 0.47 US gal/h
Tank capacity (fuel) = 5.3 US qt
Power transmission = From drive motor via centrifugal clutch and V-belt direct to exciter.
Fuel type = Diesel
